지반이 여러 가지 외력을 받았을 때 나타내는 현상은 크게 두 가지 인데, 지반의 침하(settlement)와 변형에 의한 파괴(failure)가 대표적인 현상이다.
흙은 엄격히 말하면, 다른 재료들과 마찬가지로 인장과 전단에 의하여 파괴되나, 대부분의 경우 인장 저항력이 무시할 수 있을 만큼 작기 때문에, 실질적으
사질토의 Mohr-Coulomb 파괴곡선은 평면의 원점을 통과하므로 강도정수 2개 중에서 점착력는 0이 되어 Mohr-Coulomb 파괴공식은 단순히가 된다.
사질토는 전단변형시 대체로 부피변화를 일으키는데, 조밀한 상태에 있는 사질토는 부피증가를, 그리고 느슨한 상태의 사질토는 부피감소를 일으킨다. 미시적인
2.7 Shrinkage
- Theoretical value: (a=35, : Maximum Shrinkage Strain Ratio)
- The process of finding 'a'
1. Arranging excel data
2. Finding 'a' with using a grapher program
(Converting Excel data into graph shape)
(Standardization of graph through regression analysis)-회귀분석을 통한 그래프 평균화
(Finding 'a' with using shrinkage equation)
3. Finding 'a'
in the range of theory, and the value from the second experiment is 0.16 which also comes under the range of theory. In case of specimen no.1, there was an error of 12.6% but the Poisson's ratio is highly appropriate. From this, we can analogize the Poisson's ratio has nothing to do with strength, but is related to the materials.
4. Shear Modulus of Elasticity
‣ Theoretical Value
※반도체 제조공정 중 기존의 lithograph 공정과 잉크젯 프린팅 공정의 차이와 잉크젯 프린팅 공정을 적용하였을 경우 얻어지는 장점
A. 반도체 제조공정 중 기존의 lithograph 공정
1.Photolithography
리소그래피는 포토레지스트를 도포하는 공정으로 시작해 노광, 현상, 에칭, 포토레지스트 제거에 이르는
DirectShear Test)이다.
직접전단시험은 상하로 분리된 전단상자 속에 시료를 넣고 수직하중을 가한 상태로 수평력을 가하여 전단상자 상하단부의 분리면을 따라 강제로 파괴를 일으켜서 간편하게 지반의 강도정수를 결정할 수 있는 시험으로서, 그 결과는 토압, 사면의 안정, 구조물 기초의 지지력 등의
direction.
Thanks. Thats worth about ten seconds.
Im on the air. Bye.
Ahoy, mateys. This is KAB, Antonio Bay.
Stevie Wayne here,
beaming a signal across the sea.
For the men in the Sea Grass,
miles out tonight,
a warm hello and keep a watch out
for that fog bank,
heading in from the east.
In the meantime, relax with me
while I play this song
from the Coupe De Villes
dedicated just to you.
Boy, wo
is a low cost alternative to propellers. Vertical impeller flocculator has high energy efficiency (it means less power is required) and has low shear stress (lower variation in G). Also it can compact flocs well and has less settling problem at the bottom. Direction of water flow by impeller rotation must be down to prevent settling, and motor is on the top of the tank for easy maintenance.
position, skin thickness and taper ratio.
I Beam shape
4.2. I Beam
Beam theory shows that the I-shaped section is a very efficient form for carrying both bending and shear loads in the plane of the web. On the other hand, the cross-section has a reduced capacity in the transverse direction, and is also inefficient in carrying torsion.
4.3. Two spar structure
Two spar structure
Medical treatment
< Indication >
Uncomplicated Type B
Chronic Aortic dissection
Stable dissection isolated to Aortic arch
< Objective >
Control high blood pressure, if present.
Reduce the shear-force of blood from the left ventricle
< Drugs >
β-blocker + sodium nitroprusside
Ca+ channel blocker
Direct vasodilator (diazoxide, hydralazine) 은 금기 ! Tear 을 더